My internship in Berlin
Hello everyone, I’m Sartorato Nicolò, I’m eighteen and I Study electronics near Venice, in Italy. With the “Erasmus+” project I’ve been in Berlin for 35 days and I had the pleasure of working for 4 weeks at the Maker Store in Danziger Straße, the perfect place if you love electronic and robotics.
I liked so much to do my internship here, because I discovered a new way to study electronics, the Brick’s system by Brick’R’Knowledge, with which you can learn quickly while having fun.
Personally, I mostly worked with the Arduino set, with whom I design a thermometer with a humidity sensor, for an OLED screen and also for a LED grid 16×16 (code below).
I recommend everyone to try to use the system of bricks, I hope to return here one day in the future because it’s a very interesting place to make projects, study and to expand personal knowledge.
Here´s the video showing my circuit in action: https://www.youtube.com/watch?v=Hz5bsGzVQjk
See you at Maker Store 😉
Sartorato Nicolò
Code:
int temp=0;
int hum=0;
void setup(){
i2c_oled_initall(i2coledssd);
Wire.begin();
Serial.begin(9600);
Serial.println(“Temperature misuration”);
Serial.println();
Serial.println(“Type,\tstatus,\tHumidity (%),\tTemperature (C)”);
}
void loop(){
char buffer[30];
char buffe [20];
disp_buffer_clear(COLOR_BLACK);
disp_print_xy_lcd(0, 0, (unsigned char*) “DEGREES”, COLOR_WHITE, 0);
disp_print_xy_lcd(0, 24, (unsigned char*) “HUMIDITY”, COLOR_WHITE, 0);
disp_lcd_frombuffer();
int stat;
Serial.print(“DHT11, \t”);
stat = DHT.read(DHT11_PIN);
switch (stat){
case DHTLIB_OK:
Serial.print(“OK,\t”);
break;
case DHTLIB_ERROR_CHECKSUM:
Serial.print(“Checksum error,\t”);
break;
case DHTLIB_ERROR_TIMEOUT:
Serial.print(“Time out error,\t”);
break;
default:
Serial.print(“Unknown error,\t”);
break;
}
// DISPLAT DATA
Serial.print(DHT.humidity,1);
Serial.print(“,\t”);
Serial.println(DHT.temperature,1);
temp = DHT.temperature ;
hum = DHT.humidity;
sprintf(buffer, “%4d Celsius”, temp);
sprintf(buffe, “%4d / 100”, hum);
disp_print_xy_lcd(0, 11 ,(unsigned char*)buffer, COLOR_WHITE, 0);
disp_print_xy_lcd(0, 35 ,(unsigned char*)buffe, COLOR_WHITE, 0);
disp_lcd_frombuffer();
delay(4000);
}